A torque wrench from Delta Imports costs anywhere from ₹2,590 for a compact 1–6 Nm click

wrench to ₹1,04,500 for a 2,000 Nm digital wrench. That spread is not random. Each type of

torque wrench is built for a different job, and the price reflects the mechanism, the torque range

and the accuracy you get.

This guide sets out current torque wrench prices in India across Delta Imports’ manual,

mechanical and digital ranges, explains where each type earns its place, and shows why

workshops and manufacturers across India choose Delta Imports to buy them.

Torque Wrench Price in India at a Glance

All prices are Delta Imports list prices, exclusive of GST. 

Why buy manual torque wrenches from Delta Imports

• Ten models from 1 Nm to 1,000 Nm, so every workshop job is covered by one series and

one supplier.

• Click-type mechanism with a clear audible and tactile signal at the preset torque, which

helps prevent over-tightening.

• Heavy-duty capacity up to 1,000 Nm on a 3/4" drive for machinery and infrastructure work.

Browse manual torque wrenches →

Mechanical Torque Wrenches: Precision in the Low Ranges

A mechanical torque wrench works on the same spring-and-click principle, but it is built for

lower, tighter ranges where small fasteners and delicate parts leave little room for error. Delta

Imports’ DTW series runs from 0.4 Nm to 200 Nm with a ratchet head, down to a compact 150

mm, 1/4" drive wrench for 2–10 Nm work.

Use it for: electronics and instrument assembly, medical and aerospace components, small

automotive fasteners, and any job below 10 Nm where a general workshop wrench is too coarse.

Why buy mechanical torque wrenches from Delta Imports

• Test certificate and user manual in the box with DTW wrenches, so the tool arrives

checked and documented.

• Manufactured in Taiwan and imported by Delta Imports.• Nine ranges from 0.4 Nm to 200 Nm, including four models built for work below 10 Nm.

Browse mechanical torque wrenches →

Digital Torque Wrenches: Live Readings and Proof of Torque

A digital torque wrench measures torque with an electronic sensor and shows it live on a

display, with an alert when you reach the target. Readings can be stored, which matters when

you need to prove every joint was tightened correctly, not just assume it.

Use it for: production lines, quality control, aerospace and automotive assembly, and any

process where torque has to be recorded or audited.

Why buy digital torque wrenches from Delta Imports

• Twenty models from 0.3 Nm to 2,000 Nm, in fixed ratchet-head and interchangeable-head

versions.

• Accuracy published on the listing: the 10–200 Nm models are rated to ±2% clockwise

and ±3% anticlockwise, with a 0.1 Nm least count.

• Data storage for torque records, plus a test certificate and user manual in the box.

Browse digital torque wrenches →

Not sure which type you need?

Read our Complete Guide to Torque Wrenches or compare the three types side by side in Digital

vs Mechanical vs Manual Torque Wrench.

5 Things That Move the Price

1. Torque range and drive size. Higher torque needs a longer lever, a stronger body and a

bigger drive. At Delta Imports, a 40–220 Nm manual wrench is ₹4,250, while the 3/4" drive 200–

1,000 Nm model is ₹21,042. In digital, the 10–200 Nm wrench is ₹12,255 and the 200–2,000 Nm

model is ₹1,04,500. Buy the range your fasteners need: a wrench performs best in the middle of

its range, not at the extremes.

2. Mechanism. In a similar range, a manual click wrench (40–220 Nm, ₹4,250) costs less than a

precision mechanical wrench (40–200 Nm, ₹10,890) or a digital wrench (10–200 Nm, ₹12,255).

You pay more for precision build, then for electronics and recorded readings.

3. Accuracy. The international standard for hand torque tools, ISO 6789-1:2017, allows a

maximum deviation of ±4% for most tool classes above 10 N·m and ±6% at or below 10 N·m

(source). Digital wrenches can go tighter: Delta Imports’ 10–200 Nm models are rated to ±2%

clockwise. Match the accuracy to what your specification or quality system requires.

4. Interchangeable heads. An interchangeable-head digital wrench lets one body take different

end fittings, so it can reach fasteners a fixed ratchet head cannot. The head changes the fitting,

not the torque range. At Delta Imports the difference is modest: ₹12,591 for the 10–200 Nm

interchangeable model against ₹12,255 for the fixed-head version.

5. Documentation and calibration. A test certificate tells you the tool was checked before it

reached you, and quality audits often ask for one. Calibration is also a running cost: ISO 6789

calls for recalibration after 5,000 cycles or 12 months, whichever comes first (source). Factor

both in when you compare prices.Which Torque Wrench Fits Your Budget?

• Car, bike or general workshop: a manual click wrench. The 40–220 Nm model at ₹4,250

covers most passenger-vehicle work.

• Electronics, instruments and fasteners under 10 Nm: a mechanical wrench such as the

2–10 Nm at ₹7,785, or a 0.3–6 Nm digital wrench at ₹8,010 if you want a live reading.

• Assembly lines, QA and aerospace: a digital wrench. The 10–200 Nm model at ₹12,255

gives ±2% clockwise accuracy and stores readings.

• Heavy machinery and infrastructure: the manual 200–1,000 Nm at ₹21,042, or a digital

wrench up to 2,000 Nm where every reading must be recorded.

• Buying for a team: look at total cost of ownership. One supplier covering every range, with

test certificates and a single point of contact, simplifies recalibration and audits.

Still weighing manual against digital? Read Manual vs Digital Torque Wrench: Which Is Better for

Industrial Use?

Why Delta Imports Is the Right Place to Buy

Whichever type your work calls for, where you buy it matters as much as what you buy. Delta

Imports is a specialist in precision torque tools, not a general hardware store, and that shows in

every order.

• Every type, every range, one supplier. 57 torquing tools from 0.3 Nm to 2,000 Nm across

manual, mechanical and digital wrenches, plus torque screwdrivers, adapters and

accessories.

• Transparent pricing. Prices are published for every model, so you can plan your budget

before you enquire.

• Specifications you can check before you buy. Torque range, drive size, length and, on

digital and mechanical wrenches, accuracy are published on each product page.

• Tested and documented. Digital and mechanical wrenches ship with a test certificate and

user manual.

• Expert help from a Bengaluru team. We recommend the right tool by Nm range, drive size

and accuracy requirement, so you buy once and buy right.

• Bulk and team orders. Equipping a workshop or production line? Ask for a quote.

Don’t Buy on Price Alone

The cheapest wrench that covers your torque range is not automatically the right buy. If its

accuracy does not match what your process requires, or it arrives with no documentation, the

saving disappears quickly. A joint tightened outside specification does not just risk a failed audit:

it puts every part tightened with that tool in question. Buying a correctly specified, documented

tool from a specialist is the cheaper decision over the life of the wrench.

Find the right torque wrench at the right price

Explore the full Delta Imports range of manual, mechanical and digital torque wrenches, from 0.3

Nm precision work to 2,000 Nm heavy industrial fastening. Buying for a team or need a bulk

quote? Talk to our team.

Browse Torquing Tools →Frequently Asked Questions

How much does a torque wrench cost in India?

At Delta Imports, manual click-type torque wrenches start at ₹2,590 (1–6 Nm), and the popular

40–220 Nm model is ₹4,250. Mechanical precision wrenches start at ₹7,785, and digital torque

wrenches start at ₹8,010, with the 10–200 Nm digital model at ₹12,255. All prices are exclusive

of GST.

Which is better: manual, mechanical or digital?

Each suits a different job. Manual click wrenches are the economical choice for automotive and

maintenance work. Mechanical wrenches cover precision work in low ranges from 0.4 Nm. Digital

wrenches give live readings, tighter accuracy and stored records for production and QA.

Is a digital torque wrench worth the extra cost?

Yes, when you need a live reading, tighter accuracy or a record of the torque applied, as on

assembly lines and in quality control. For general servicing, a manual click wrench does the job

at a lower price.

What accuracy should a torque wrench have?

ISO 6789-1:2017 allows a maximum deviation of ±4% for most tool classes above 10 N·m and

±6% at or below 10 N·m. Delta Imports’ 10–200 Nm digital wrenches are rated to ±2% clockwise

and ±3% anticlockwise.

How often should a torque wrench be calibrated?

ISO 6789 calls for recalibration after 5,000 cycles or 12 months, whichever comes first.

Recalibrate sooner if the wrench is dropped, overloaded or used on safety-critical joints.

Where can I buy a torque wrench online in India?

Delta Imports supplies manual, mechanical and digital torque wrenches from 0.3 Nm to 2,000

Nm online at deltaimports.in, with published prices and a Bengaluru-based team to help you

choose.